Name: Easy Touch U-100 Insulin Syringe with Needle
Brand: Biotech Compounds
Price: 9.99 USD
Availability: Discontinued
Rating: 4.8 (127 reviews)

Question 1

What is the Easy Touch U-100 Insulin Syringe with Needle?

Accepted Answer

The Easy Touch U-100 Insulin Syringe with Needle is a single-use laboratory syringe with a permanently attached needle. Each syringe has a 1cc barrel marked in U-100 units, a 30 gauge needle, and a 5/16 inch (8mm) needle length. It is sold in a pack of 10 and is used in research preparation for drawing and measuring small liquid volumes from reconstituted vials.

Question 2

What gauge and needle length does the Easy Touch U-100 Insulin Syringe use?

Accepted Answer

The Easy Touch U-100 Insulin Syringe with Needle uses a 30 gauge needle that is 5/16 inch, or 8mm, long. The 30 gauge designation means a thin needle diameter, and the short 8mm length is a common choice for laboratory work with small vials. The needle is fixed to the 1cc barrel, so there is no separate needle to attach or remove.

Question 3

How many syringes come in a pack of Easy Touch U-100 Insulin Syringes?

Accepted Answer

Each pack of the Easy Touch U-100 Insulin Syringe with Needle contains 10 individually wrapped syringes. Every syringe in the pack has the same 1cc capacity, 30 gauge needle, and 5/16 inch needle length. Researchers who work through several vials in a session often keep more than one pack on hand because each syringe is intended for a single use.

Question 4

What do the U-100 markings on the Easy Touch syringe barrel mean?

Accepted Answer

The barrel of the Easy Touch U-100 Insulin Syringe with Needle is graduated in units on a U-100 scale, where 100 units equals 1 milliliter. On this 1cc syringe, each unit therefore equals 0.01 milliliter. The markings are printed clearly on the barrel so a researcher can read a measured volume accurately when drawing liquid from a reconstituted research vial.

Question 5

How is the Easy Touch U-100 Insulin Syringe needle constructed?

Accepted Answer

The needle on the Easy Touch U-100 Insulin Syringe with Needle is made from surgical-grade steel with a film coating, a tri-bevel tip, and an electro-polished finish that reduces surface imperfections. The cannula has a thin-wall design, which gives a wider internal bore for its gauge and lets liquid pass with less plunger resistance during laboratory handling.

Question 6

What features does the Easy Touch U-100 Insulin Syringe barrel have?

Accepted Answer

The barrel of the Easy Touch U-100 Insulin Syringe with Needle is lubricated so the plunger moves smoothly and consistently. It carries clear U-100 unit markings for accurate measurement and has pronounced finger flanges that give a secure grip. The 1cc capacity suits the small volumes typically drawn from reconstituted peptide vials in a research setting.

Question 7

How is the Easy Touch U-100 Insulin Syringe used in research preparation?

Accepted Answer

In research preparation the Easy Touch U-100 Insulin Syringe with Needle is used to draw a measured volume of liquid from a vial. A common workflow is to draw Bacteriostatic Water into the syringe, add it to a lyophilized vial for reconstitution, and later draw a measured volume of the reconstituted solution for a laboratory procedure. Each syringe is discarded after one use.

Question 8

What products pair with the Easy Touch U-100 Insulin Syringe on the site?

Accepted Answer

The Easy Touch U-100 Insulin Syringe with Needle pairs with Bacteriostatic Water and Acetic Acid 0.6% for reconstituting lyophilized research peptides, and with the 3ml Vial caps pack of 10 for closing prepared vials. It is also a natural companion to the Research Starter Kit and the Peptide Vial Storage Case for researchers setting up a complete laboratory preparation bench.

Question 9

Under what manufacturing standards are Easy Touch U-100 Insulin Syringes made?

Accepted Answer

Easy Touch U-100 Insulin Syringes with Needle are produced under the FDA 510(k) processes of MHC Medical Products. That controlled manufacturing covers every component, including needle grinding and barrel calibration, so gauge, length, and volume markings stay consistent from syringe to syringe. The needle sharpness characteristics were evaluated by STR Labs.

Question 10

How should Easy Touch U-100 Insulin Syringes be stored and handled?

Accepted Answer

Keep the Easy Touch U-100 Insulin Syringe with Needle in its sealed wrapper in a clean, dry place at room temperature until it is needed. Do not use a syringe if the wrapper is damaged or the needle cap is missing. Each syringe is single use, and used syringes belong in a proper sharps container according to laboratory safety rules.

Question 11

Can the Easy Touch U-100 Insulin Syringe be reused in the laboratory?

Accepted Answer

No. The Easy Touch U-100 Insulin Syringe with Needle is a single-use item. Reusing a syringe dulls the tri-bevel tip and risks contaminating a research vial. Laboratory practice is to use a fresh syringe for each vial and each draw, then discard the used syringe in a sharps container. The pack of 10 is sized so a fresh syringe is always available.

Question 12

Who can purchase the Easy Touch U-100 Insulin Syringe from Biotech Compounds?

Accepted Answer

The Easy Touch U-100 Insulin Syringe with Needle is sold strictly as a laboratory supply for research use by qualified researchers and research organizations. Purchasers must be 21 or older. The research peptides it is used with are not drugs or dietary supplements and are not for human or animal consumption. Biotech Compounds supplies this syringe only to support laboratory research preparation.

Easy Touch U-100 Insulin Syringe with NeedleEasy Touch U-100 Insulin Syringe with Needle, 30G 1cc 5/16-Inch (8mm) pack of 10

Product Details

Frequently Asked Questions About Easy Touch U-100 Insulin Syringe with Needle

Related Products

3ml Vial caps pack of 10

Acetic Acid 0.6%

Bacteriostatic Water

Comfort Hoodie

Purity, documented

What the box and the inbox are like.